Phone: + 613 9702 4402 I Fax: +613 9702 4877
Last modified: 14th December 2010 I Webmaster: webmaster@afw
© 2001-2010 AFW Technologies Pty. Ltd.
PM Filter WDM
Polarization Beam Splitter
In-Line Polarizer
PM Circulator
PM Isolator
PM Faraday Rotator/Optical Fiber Mirror
PM Patchcord
High Power Isolator
PM Band Pass Filter
PM Dense WDM
PM Fiber Coupled Attenuators
In-Line Faraday Rotator
PM Filter Coupler
Singlemode Coupler/Splitter
SM Tree Coupler Module
Polarization Insensitive Isolator
High Power SM Isolator
Band Pass Filter
SM Fuse WDM
Fiber Optic Isolator
Fiber Optic Circulator
Faraday Rotator/
Optical Fiber Mirror
SM Filter WDM
CWDM
DWDM
Patchcords/Pigtails/
Mating Adaptors
MM Large Core Patchcords
MM Patchcords POF
Optical Attenuators
Customised Products/Spools
MM Isolator
MM WDM
MM Splitter/Coupler
Polarization Beam Splitter
In-Line Polarizer
PM Circulator
PM Isolator
PM Faraday Rotator/Optical Fiber Mirror
PM Patchcord
High Power Isolator
PM Band Pass Filter
PM Dense WDM
PM Fiber Coupled Attenuators
In-Line Faraday Rotator
PM Filter Coupler
Singlemode Coupler/Splitter
SM Tree Coupler Module
Polarization Insensitive Isolator
High Power SM Isolator
Band Pass Filter
SM Fuse WDM
Fiber Optic Isolator
Fiber Optic Circulator
Faraday Rotator/
Optical Fiber Mirror
SM Filter WDM
CWDM
DWDM
Patchcords/Pigtails/
Mating Adaptors
MM Large Core Patchcords
MM Patchcords POF
Optical Attenuators
Customised Products/Spools
MM Isolator
MM WDM
MM Splitter/Coupler
Products
Loading
1064nm Polarization Maintaining PM Isolator
The 1064nm polarization maintaining fiber isolator is a two port micro optic device built with PM panda fiber. The device guides optical light in one direction and eliminates back reflection and back scattering in the reverse direction. The PM isolator features low insertion loss, high isolation, high extinction ratio, high reliability and stability. The device can be built with 250um bare fiber pigtails, 900um pigtails or 3mm cable. PM panda fiber isolator widely used in amplifier systems, fiber optic systems and fiber lasers.
The 1064nm polarization maintaining fiber isolator is a two port micro optic device built with PM panda fiber. The device guides optical light in one direction and eliminates back reflection and back scattering in the reverse direction. The PM isolator features low insertion loss, high isolation, high extinction ratio, high reliability and stability. The device can be built with 250um bare fiber pigtails, 900um pigtails or 3mm cable. PM panda fiber isolator widely used in amplifier systems, fiber optic systems and fiber lasers.
Package Dimensions
| Ordering Examples | |
| Part Number | Description |
| PISO-64-2-L-5-1 |
1064nm Polarization Maintaining Isolator, dual stage, 900um loose tube jacket, 0.5m fiber length, FC/UPC connectors |
| PISO-64-2-C-5-1 |
1064nm PM Isolator, dual stage, 3mm cable jacket, 0.5m fiber length, FC/UPC connectors |
| PISO-13-1-B-7-0 |
1310nm Polarization Maintaining Isolator, single stage, 250um bare fiber, 0.75m fiber length, without connectors |
| PISO-15-2-L-5-2 |
1550nm PM Isolator, dual stage, 250um bare fiber, 900um loose tube jacke, 0.5m fiber length, without connectors |
| PISO-14-1-C-7-1 |
1480nm PM Isolator, single stage, 3mm cable jacket, 900um loose tube jacke, 0.75m fiber length, FC/UPC connectors |
| 1064nm Polarization Maintaining PM Isolator | ||
| Specifications | ||
| Parameters | Single Stage | Dual Stage |
| Center Wavelength | 1064nm | |
| Typ. Peak Isolation | 36dB | 54dB |
| Min. Isolation at 23°C; all SOP | 35dB | 45dB |
| Insertion Loss at -5-50°C; all SOP | <2.0dB, typ. 1.5dB | <3.4dB, typ. 2.5dB |
| Extinction Ratio | ³ 20dB | ³ 20dB |
| Min. Return Loss (input/output) | 55/50dB | 55/50dB |
| Max. Optical Power (CW) | 300mW | |
| Max. Tensile Load | 5N | |
| Fiber axis alignemnet | slow axis and fast axis both working | |
| Fiber Type | PM 980 Panda Fiber or Specify | |
| Operation Temperature | -5 to +50°C | |
| Storage Temperature | -40 to +85°C | |
| Note1: Values specified are without connector loss. | ||
| Note2: The PM fiber and the connector key are aligned to the slow axis. | ||
| Ordering Information | |
| PISO-64-V-X-Y-Z | |
| V- Stage | 1 - Single stage, 2 - Dual stage |
| X: Pigtail type | B - 250 um panda fiber, L - 900 um loose tube panda fibre, C - 3mm cable, S - Specify |
| Y: Pigtail length | 5- 0.5m, 7 -0.75 m, S - Specify |
| Z: Connector | 1 - FC/UPC, 2 - FC/APC, 0 - None, S - Specify |
Frequently Asked Questions
Frequently asked questions coming soon.
Frequently asked questions coming soon.
| 1310nm / 1480nm or 1550nm Polarization Maintaining PM Isolator | ||
| Specifications | ||
| Parameters | Single Stage | Dual Stage |
| Center Wavelength | 1310nm, 1480nm or 1550nm | |
| Insertion Loss at -5-70°C; CWL±20nm,all polarization states | ³ 0.6dB | ³ 0.7dB |
| Typ. Peak Isolation | 42dB | 58dB |
| Min. Isolation at 23°C;CWL±15nm,all polarization states | 30dB | 44dB |
| Extinction Ratio | ³ 20dB | ³ 20dB |
| Min. Return Loss (input/output) | 55/50dB | 55/50dB |
| Fiber Type | PM Panda Fiber | |
| Max. Optical Power (CW) | 300mW | |
| Max. Tensile Load | 5N | |
| Fiber Type | PM 980 Panda Fiber or Specify | |
| Operation Temperature | -5 to +70°C | |
| Storage Temperature | -40 to +85°C | |
| Note1: Values specified are without connector loss. | ||
| Note2: The PM fiber and the connector key are aligned to the slow axis. | ||
Package Dimensions
| Ordering Information | |
| PISO-R-SS-X-Y-Z | |
| R- Stage | 1 - Single stage, 2 - Dual stage |
| SS: Wavelength | 13 - 1310nm, 14 - 1480nm, 15 - 1550nm |
| X: Pigtail type | B - 250 um panda fiber, L - 900 um loose tube panda fibre, C - 3mm cable, S - Specify |
| Y: Pigtail length | 5- 0.5m, 7 -0.75 m, S - Specify |
| Z: Connector | 1 - FC/UPC, 2 - FC/APC, 0 - None, S - Specify |
